Looking for Maximum
Parking in Less Space – City Parks Rotary Parking is the Best
Lack of available space
has always been an issue in metropolitan regions and big cities, and
automobiles parked randomly on the streets further limit available space. To address
the issue of parking in congested areas, various types of vehicle parking
systems, such as multi-level automated car parking, are used around the world.
A rotary parking system is a mechanical system designed to reduce the amount of
space required for parking cars. An RPS, similar to a multi-story parking
garage, provides parking for cars on multiple levels that are stacked
vertically to increase the number of parking spaces while conserving land.
Rotary car parking
system
The Rotary Car Parking
System is a type of smart rotary parking system. The use of a rotary car
parking system successfully eliminates the need for a large amount of space.
Furthermore, the latter provides the added benefits of flexibility without the
need for an attendant, as well as added security and fewer chances of vehicle
damage. Because the model is made of composite parts, it is simple to assemble
and disassemble, making it more convenient than traditional car parking
systems. The rotary model was created specifically to fit multiple cars in the
horizontal space of two.
Benefits
Saving space
When compared to a
multi-story parking garage, the RPS saves space largely through a considerable
reduction in area that is not directly connected to automobile parking.
· Parking space width, depth, and
distances between parking spots are drastically decreased because no
authorization is required for driving into the parking place or unlocking car
doors.
· There are no driving lanes or ramps
required to drive to/from the entrance/exit of a parking spot.
· Because there is minimal foot activity
in the parking area, the ceiling height is kept to a minimum.
· It significantly reduced space
requirements. When compared to regular parking, rotary parking systems allow
you to expand the number of parking spots by up to 8 times.
Installation and
relocation are simple.
The rotary parking
systems can be moved and reinstalled in a different place. Hence, the
installation and relocation are easy and simple. Which is save the time as
well.
Modularity
The systems adjust to
the capabilities necessary at a specific site. Therefore, you can adjust the
rotary system depends on your needs,
Automation
The capacity to fully
automate the system reduces the requirement for human intervention.
Outward Appearance
Exterior surfaces provide a variety of façade performance elements, ranging from alignment to the primary building design or architectural fit to solar panel installation or commercial usage for advertising space, allowing for a partial return on investment.
Key features
The Rotary parking
system’s key characteristics include: modular construction that saves space and
the flexibility to easily add extra capacity.
·
Relocation and reinstallation
possibilities
·
Suited for all car kinds – sedans,
station waggons, and SUVs
·
Vehicle theft, damage, and weather
conditions protection
·
Silent operation – low noise levels as
compared to other types of parking systems
·
The systems are built as stand-alone
buildings to reduce the possibility of flooding.
·
Low energy usage
·
Simple to use
·
Llow operating costs
Tips park a car in
rotary parking system
Rotary parking systems
have begun to take over cities, but individuals who first meet one are unsure
how to engage with it.
Ø Before
beginning to park in the rotary parking, the vehicle must come to a complete
stop in front of the parking system.
Ø Passengers
must exit the vehicle ahead of time, and any possessions must likewise exit the
vehicle ahead of time.
Ø The
driver must proceed to the parking system control panel and ensure that no persons,
animals, or items are present in the parking system area.
Ø Enter
the space number of the chosen platform on the keypad, then get a specific
platform down to the entry level. Each card corresponds to a distinct platform.
Ø The
rotating parking system will begin to move. The parking pallets will rotate
until the required number of parking pallets is at the lowest position. The
parking system will thereafter come to a halt.
Ø The
motorist is now free to begin driving onto the parking platform. The entry speed
is 2 km/h.
Ø The
driver should enter the station such that the automobile’s wheels are in
specific recesses in the platform intended to centre the car on the platform.
Simultaneously, the motorist should check his or her reflection in the mirror
opposite the exit on the other side of the parking system. The reflection in
the mirror will indicate the car’s precision and proper location on the parking
platform.
Ø The
automobile must come to a complete stop when the wheels come into contact with
the specific wheel stop. This indicates that the automobile is appropriately
pre-installed if it is of a suitable size for parking in the parking system.
Ø After
parking the car on the parking system’s parking platform and receiving no
indications from the safety system, the driver may exit the vehicle.
Ø With
the exception of putting the car on the parking platform, removing the vehicle
from the system occurs in the same sequence.
Why it is best?
Rotary parking is far
safer than you may think
Many people are worried
about the security and dependability of automated parking systems. In
actuality, these systems have been refined through time, and they, like
elevators, are both safe to use and simple to construct. Furthermore, because
there is no human access to parked automobiles, they are safer than traditional
parking garages. This greatly lowers the danger of vandalism, theft, and
unintentional car damage.
Using an rotary parking
system, you can park your car faster
Many people are anxious
about how long it will take to park and retrieve their vehicle utilising an
automated parking system. In actuality, an automated parking garage’s current
parking/retrieval average is one minute per car. Everyone parks on the ground
floor, and the mechanism raises the car and puts it in the next available
parking slot. There’s no need to waste time looking for parking, which might
take minutes or hours.
It is a much faster to
build and takes up a lot less space.
Unlike existing
conventional parking options, automated parking takes from half to one-third of
the land necessary to create the appropriate parking spots for your building.
What exactly does this mean? While a concrete ramp garage may require 145,000
square feet of land, an rotary parking system with the same capacity will
require around 50,000 square feet and will be completed in a quarter of the
time.
It is affordable and
durable
In crowded regions,
rotary parking garages are a must. Land is becoming increasingly precious,
necessitating the creation of new areas. Rotary car garages were utilised to
shield automobiles from bad weather and to keep costly vehicles secure. The
same garage types have been improved to satisfy the demands of the
ever-increasing automobile population.
Any space becomes more
valuable with an rotary parking system
A building’s parking
space can be increased by installing rotary parking system. Because the cost of
real estate continues to rise year after year, builders and developers are
increasingly including an automated parking garage in their building plans. To
fit your budget, you may select both automatic and rotary parking solutions.
The rotary automated systems can be developed to provide online booking
capabilities. Users can access the online reservation system and choose a
location from the available alternatives.
Parking lifts increase
the value of your property
Parking elevators are
utilised in facilities to make the best use of available space. The lifts allow
you to park your automobile at various levels. Depending on your demands, you
may have a 15-level garage or a 35-level garage. The parking system makes it
easy for users to park and collect their cars. The new technologies are
intelligent and can handle the entire parking system on their own. They contain
sensors that indicate out the available parking places.
Cost effective parking
system
It is simple to use,
with the motorist parking the vehicle and leaving it in the system at ground
level. When the driver exits the built-in safety zone, the vehicle is
automatically parked by the mechanism rotating to elevate the parked automobile
away from the bottom centre point. This leaves an open parking place on the
ground floor for the following automobile to park in. The parked automobile may
be readily recovered by pressing the button for the position number on which
the car is parked.
Parking takes up
valuable commercial space
Except for the vertical
vehicle parking system, all other systems make use of a big ground area. The
vertical car parking system was designed to make the most of the available vertical
space while utilising the least amount of ground space. It is highly successful
when put in busy locations that are already established and have a parking
scarcity. The necessary automobile rotates down to ground level, the driver
enters the safety zone, and the car is reversed out of the system.
End line
The rotary parking
system use a popular notion to save parking space which letting the driver and
passengers out of the car before it is parked. This is a completely automated
rotary parking system the automobile is driven up to an RPS entrance point, and
the driver and passengers exit the vehicle.
